ACCU RIP .ADD TRAPPING FULL

If the specified hold-time interval is less than the configured keepalive value, then the keepalive value is reset to one third of the specified hold-time interval. If the specified keepalive value is greater than the configured hold-time, then the specified value is ignored, and the keepalive is set to one third of the current hold-time value. Even though the OS implementation allows the keepalive value and the hold-time interval to be independently set, under the following circumstances, the configured keepalive value is overridden by the hold-time value: The keepalive value is generally one-third of the hold-time interval. A keepalive message is sent every time this timer expires. This command configures the BGP keepalive timer. The no form of the command deletes the cluster ID and effectively disables the Route Reflection for the given group.

ACCU RIP .ADD TRAPPING FULL

If the route came from a client peer, the route reflector sends the route to all non-client peers and to all client peers except the originator.ДЇor redundancy, a cluster can have multiple route reflectors.Д¬onfederations can also be used to remove the full IBGP mesh requirement within an AS. If the route was received from a non-client peer, then the route reflector sends the route to all clients in the cluster. When a route reflector receives a route, first it must select the best path from all the paths received. Peers that are not part of the cluster are considered to be non-clients. A route reflector and its clients form a cluster. Normally, all BGP speakers within an AS must have a BGP peering with every other BGP speaker in an AS. Route reflectors are used to reduce the number of IBGP sessions required within an AS. This command configures the cluster ID for a route reflector server.

Accu rip .add trapping